home *** CD-ROM | disk | FTP | other *** search
- *A1*15*T2*C
- Fish
-
- *3*T1*L
- Guide the fish from the top left hand
- corner of the screen to its "home" in
- the bottom right hand corner. If you
- try to move the fish into an area in
- which there is already an obstacle the
- fish will remain where it is.
-
- You can use the arrow keys or the
- mouse. If you use the mouse the
- pointer must be in a square next to
- where the fish is.
-
- There are four levels of difficulty.
- ***
- *A2*15*T2*C
- Net
- *3*T1*L
-
- Guide a fish around the net until you
- can get the fish back to its home. If
- you try to move the fish through a
- part of the net in which there aren't
- any gaps the fish will remain where
- it is.
-
- You can use the arrow keys or the
- mouse. If you use the mouse the
- pointer must be in a square next to
- where the fish is.
- ***
- *A3*15*T2*C
- Faces
-
- *3*T1*L
- Point to the face that is the odd one
- out. Use the mouse or the arrow keys.
-
- Underneath, the small coloured faces
- indicate how many goes it takes to get
- it right.
-
- Green face - first time right
- Yellow face - second time right
- Red face - third time right
- Grey face - three wrong attempts
-
- There are four levels of difficulty.
- ***
- *A4*15*T2*C
- Houses
-
- *3*T1*L
- Point to the house that is the same as
- the house on the left. Use the mouse
- or the arrow keys.
-
- Underneath, the small coloured houses
- indicate how many goes it takes to get
- it right.
-
- Green house - first time right
- Yellow house - second time right
- Red house - third time right
- Grey house - 3 wrong attempts
-
- There are four levels of difficulty.
- ***
- *A5*15*T1*C
- Printing
-
- *15*T1*C
- Printer setup
-
- *15*T1*C
- Printer
-
- *3*T1*L
- This option allows you to change the
- current printer driver. Select from
- the list of available drivers, the
- one that matches your printer.
-
- *15*T1*C
- Orientation
-
- *3*T1*L
- Select the orientation which you
- require for the print out, either
- landscape or portrait.
-
- **
- *15*T1*C
- Printing- continued (p2)
-
- *15*T1*C
- Intensity
-
- *3*T1*L
- Select the intensity of the print
- out you require. Choose either full
- or half.
-
- *15*T1*C
- Print out size
-
- *3*T1*L
- Print outs can be full size or half
- size. The size selected is indicated
- by the small picture to the left of
- this option.
- **
- *15*T1*C
- Printing- continued (p3)
-
- *15*T1*C
- Printer port
-
- *3*T1*L
- Printing can be routed through one of
- a number of ports at the rear of the
- computer.
-
- *15*T1*C
- LPT1 - for parallel printing
-
- COM1 - for serial printing
- from communications port 1
-
- COM2 - for serial printing
- from communications port 2
- (if fitted to the computer)
- **
- *15*C*T1
- Printing- continued (p4)
-
- *15*T1*C
- To start printing
-
- *3*T1*L
- Printing can be started AT ANY TIME
- from within the program by holding
- downthe Ctrl key and then pressing
- the letter P. The present screen will
- then be sent to the printer.
-
- Printing can be halted by pressing the
- ESCAPE key at any time. If printing is
- interrupted in this way there may be
- some time to wait before printing
- stops and control is returned to the
- program.
- ****
-